Back to Main Menu
Account Menu
no reviews for this product. Login to place a review.
Optima Yellowtop Auto Starting/Deep Cycle Battery is a high performance, deep cycle, dual purpose, Pure Lead AGM battery with premium cranking power, high cycling capacity and fast recharging time. It has a high purity lead/tin alloy plate with wound cell configuration that uses SPIRAL CELL technology. It can be mounted in any position and have a vibration resistant, polypropylene case.
| GROUP SIZE | SIZE | WEIGHT | CCA @ 0 DEG | RC @ MIN 25A | AH @ 20 HRS |
|---|---|---|---|---|---|
| 34/78 | 10" x 7" x 8" | 43.5 lbs. | 750 | 120 | 55 |
| CCA | Cold Cranking Amps - The discharge load in amperes which a new, fully charged battery can maintain for 30 seconds at 0 F at a voltage above 1.2 v/cell |
| AH | Ampere Hour Capacity - A unit of measurement for electron flow or current through an electrical circuit for a certain period of time. The 20 hour rate is a BCI sanctioned rating expressing ampere hours required to achieve an end voltage of 1.75 v/cell at 80 degrees Fahrenheit, and represents the batteries maximum capacity. The 5 hour rate is based on IEC (International Electrotechnical Commission) temperature standard of 30 degrees Celsius (86 degrees Fahrenheit) |
| RC | Reserve Capacity - The number of minutes a battery can be discharged at the specified rate (25, 56 or 75 amps) at 80 degrees Fahrenheit and maintain a voltage above 1.75 v/cell. |
DANGER: Lead Acid Batteries contain: Lead, Sulfuric Acid (Electrolyte), Lead compounds and Arsenic.
WARNING: This battery, battery posts, terminals and related accessories can expose you to chemicals including lead, lead compounds and other chemicals which are know to the state of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. For more information go to: www.P65warnings.ca.gov.
WARNING: Risk of fire, explosion, or burns. Do not disassemble or incinerate. Not recommended for inverted use. Follow product instructions. High voltage: risk of shock. Do not touch uninsulated terminals or connectors. Do not remove vent valve.